How to build a plasterboard wall (step by step)

A plasterboard partition is built on a frame of CW and UW profiles, boarded on both sides. You need: CW and UW profiles, plasterboard, screws, wall plugs, mineral wool, reinforcing tape and filler. Calculate the quantities with the materials calculator.

1. Fit the guide tracks (UW)Mark the wall line and fix the UW tracks to the floor and ceiling with plugs every ~50 cm.
2. Insert the studs (CW)Place the CW studs vertically in the tracks, 60 cm apart (40 cm for higher loads).
3. Board the first sideFix plasterboard on one side with screws every ~25 cm on edges and ~30 cm in the field.
4. Add the mineral woolInsert the wool between the studs for thermal and sound insulation.
5. Board the second sideClose the wall with boards on the other side, staggering the joints from the first side.
6. Finish the jointsApply reinforcing tape and filler on the joints, then sand smooth once dry.
7. FinishPrime and apply the desired finish (paint, decorative filler, etc.).